|

| |
Emflux I300 Flowmeter Transmitter
A solar powered battery-backed transmitter for use with flow detectors to provide display and output of flow measurement. Designed to meet the requirements of remote and non-powered site applications. General Applications:
Electromagnetic flowmeters for the accurate flow measurement of any conductive fluid.
- Ideally suited to irrigation. On and off farm
- Mining, remote water supplies and discharge monitoring.
- Water bore flow monitoring.
- Environmental flow measurements.
| |
| 
| |
Emflux 2020 Electromagnetic Flow Detector
The 2020 flow detector used with either our M300 or I300 flow transmitter are ideally suited to accurately measure the flowrate of a wide variety of conductive process liquids, water, wastewater and similar applications. General Applications:
- Irrigation flow measurement
- Water production and distribution
- Efluent discharge
- Selected chemical applications.
Technical Data:
Sizes: 50 - 200mm Metering Tube: ABS Plastic Pressure Limitations (At 20 degrees ambient temperature):
- 50mm = 1500 kPa
- 80mm = 1200 kPa
- 100-200mm = 900 kPa
Temperature Limitations: 80 deg C max
| |
| 
| |
Emflux 2060 Electromagnetic Flow Detector
The 2060 flow detectors offer the strength and durability of steel with a choice of chemical or abrasive resistant liners. General Applications:
- Water production and distribution
- Waste water monitoring and treatment
- Irrigation flow measurement
- Mining slurries
- Effluent discharge
- Pulp and Paper applications
Technical Data:
Sizes: 50 - 1200mm Metering Tube: 304 Stainless Steel Pressure Limitations: Limited by flange rating Temperature Limitation:
- Dependent on Liner selection
- Hard Ebonite Rubber = 80 deg C
- PTFE = 120 deg C
| |
|

| |
Emflux "Irriflow" Irrigation Flowmeter
Designed to meet the specific requirements of open channel irrigation schemes, the "Irriflow" is a high performance flowmeter for farm offtakes.
- Irriflow 450 - 450mm internal diameter
- Irriflow 600 - 485mm internal diameter
- Irriflow 12D - Direct replacement for Dethridge wheel
General Applications:
The IRRIFLOW uses the well proven electromagnetic method of measurement, which applies Faraday's Law as the principal of operation. This technique features a straight through section of pipe with no obstruction to restrict flow, and no moving parts to wear and break. The Irriflow are a direct replacement for all existing Dethridge wheel units.
| |
|

| |
Emflux M300 flowmeter transmitter
A AC or DC powered transmitter for use with flow detectors to provide display and output of flow measurement. General Applications:
Electromagnetic flowmeters for the accurate flow measurement of any conductive fluid. Ideally suited to water and waste water treatment plants, mining and general industry. | |